DP800 INJECTION SYSTEM
The DP800 was designed to pump chemicals such as permanganates
that are injected in high volumes where low volume/high pressure
pumps are not well suited. At 8 gpm, the DP800 can pump most chemicals
2-3 times faster than the Geoprobe® GS Series machines. With
acids, the need for a high volume/medium pressure pump is evident.
The DP800 fits this need.
A gravity-fed supply is recommended, especially when operating
the pump at high flow rates. The DP800 has the ability to prime
itself, and it is capable of drawing material out of a 55-gallon
drum as well. The pump is supplied with a 1.0 in. PVC hose assembly.
The pump is driven by a 9HP Honda engine with 2:1 gear reduction
and centrifugal clutch. The pump will operate at most engine speeds.
 |
DP800 Injection Pump Benefits...
- Mobile... compact
- Few replaceable parts
- High volume ... 8 gpm
- Outlet pressure... 650 psi
- Operates independently of probe machine
- Use without vehicle nearby
- Optional suction hose designed to withstand harsh oxidants
- Optional outlet hose is Teflon® lined with stainless
steel jacket to withstand oxidants
- Capable of "bottom up" or "top down"
injections
- Self-priming pump
- Internal components of pump resistant to harsh oxidants,
such as permanganates
- All mechanical operation -- no electronics on board
- Inject materials laterally into the subsurface with
either top-down or bottom-up injection.
|
 |
|
